I'm Registered at

MyFreeCopyright.com Registered & Protected

My Stamps

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Powered by Blogger.

My Stalkers

There was an error in this gadget
21 December, 2011

A Wicked Garvey New Year


This tutorial was written by Coyotie on 21 Dec., 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice. I'm using the artwork of Keith Garvey. This is a FTU tube, you can request this tube by emailing customer service for PTE

Scrap kit of choice. I'm using an FTU kit called Ringing it in by Shani of Wicked Princess Scraps. You can find this kit and many more awesome kits at Wicked Princess Scraps

This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste the city scape

Copy and paste the disco ball - resize - add a drop shadow - move to the upper left - drag below the city scape layer

Copy and paste the glitter swirl - resize - duplicate - mirror - merge down - add a drop shadow - duplicate - flip - merge down - drag below disco ball

Copy and paste the glitter top hat - resize - move to the upper right - add drop shadow

Copy and paste mask - resize - move over top of the disco ball - drag below city scape - add drop shadow

Copy and paste candles - resize - move to the lower right - add a drop shadow

Copy and paste champagne - resize - move over top of the candles - add a drop shadow

Pick 2 papers of choice - change foreground and background to pattern and find the papers - now type 2012 with a stroke width of 3 - add a gradient glow and a drop shadow - move over to the left

Copy and paste your tube - resize if needed - place where desired - add a drop shadow

Crop tag

Add artist info and license #

Add name (using the same step as you did for the 2012)

Done!!

Freya Christmas Card


This tutorial was written by Coyotie on 21 Dec., 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice. I'm using the artwork of Freya Langford-Sidebottom. Please do NOT use her work unless you have the proper license to do so. You can purchase her work and obtain a license from AIL

Scrap kit of choice. I'm using a PTU kit called Santa Baby by Kelly of Angels Designz. You can find this kit and many more awesome kits from her HERE

This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste hangers - add a drop shadow

Copy and paste card - move up slightly - add a drop shadow

On the card type out a message of choice and give it a drop shadow

Copy and paste key - resize - move to the upper left corner of the card - add a drop shadow

Copy and paste star dangle - resize - move to the right of the card - add a drop shadow

Copy and paste snowflakes - resize - duplicate - on the copy layer free rotate right 90 degrees - merge down  drag below the hangers layer

Copy and paste tree - resize - move to the left - drag below the card layer - add a drop shadow

Copy and paste candle - resize - add a drop shadow - move to the left on the card (see my tag for placement)

Copy and paste your tube - resize if needed - place where desired - add a drop shadow

Crop your tag

Add your artist info and license #

Add your name

Done!!

Garv Girl Christmas


This tutorial was written by Coyotie on 21 Dec., 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice. I'm using the art work of Keith Garvey. Please do NOT use his work unless you have to proper license to do so. You can purchase his work and obtain a license from PTE

Scrap kit of choice. I'm using PTU kit called Santa's Magic by DnScraps. You can purchase this kit and many more awesome kits from her at Sraps from the Heart


This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste paper6 - apply mask - merge group

Using the magic wand - click inside your mask - expand by 30 
Copy and paste a close-up of your tube - invert - delete - drag below your mask layer - add a drop shadow and lower the opacity to 50%

Copy and paste bead string - resize - move to left - add a drop shadow

Copy and paste reindeer - resize - move to lower right - add a drop shadow

Copy and paste Santa boot - resize - move to lower left - add a drop shadow - drag below bead layer

Copy and paste box4 - resize - add a drop shadow - move to lower left - drag below boot layer - position both the box and the boot to your liking

Copy and paste your regular tube - resize if needed -  drag just above mask layer - duplicate and drag one copy below the mask layer and add a drop shadow to this layer - on your top tube copy erase the bottom portion that your tube appears to be coming up out of the mask

Crop your tag

Add artist info and license #

Add your name

Done!!!

19 December, 2011

Blue Christmas


This tutorial was written by Coyotie on 19 Dec., 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice. I'm using the artwork of Freya Langford-Sidebottom. Please do NOT use her work unless you have the proper license to do so. You can purchase her work and obtain a license from AIL

Scrap kit of choice. I'm using a PTU kit called Blue Christmas made of Kelly of Angels Designz


This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste paper6 - apply mask - merge group - add a double drop shadow

Copy and paste the blue snowflake - drag below your mask layer - add a drop shadow

Copy and paste the diamond back - drag below your mask layer

Copy and paste a close-up of your tube - drop your opacity down to 40%

Copy and paste baubles - resize - move to lower right side - add drop shadow

Copy and paste tree - resize - add drop shadow and move left

Copy and paste presents - resize - add drop shadow - move to in front of tree

Copy and paste your tube - resize if needed - add drop shadow

Crop your tag

Add artist info and license #

For your name - open up paper4 - change your background color to pattern and find your paper...no stroke width

Add your name - add drop shadow

Done!!!

16 December, 2011

Snow Angel Forum Set



This tutorial was written by Coyotie on 14 Dec., 2011. Any resemblance to any other tutorial is purely coincidental.

Supplies:

Tube of choice. I'm using the artwork of Barbara Jensen. This is an exclusive tube sold only at Scraps N Crap. Please do NOT use this tube unless you have the proper license to do so. You can purchase this tube and obtain a license from the link above.

Snow Angel word art made by me. Please do NOT use this in any other tutorial without my express permission!!

Filters - Xenofex - Constellation & Burnt Edges
Dsbflux - Bright Noise

This tutorial was written with assumption that you have a working knowledge of PSP. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x250 transparent canvas - Flood fill with a pale color from your tube - duplicate

On your bottom layer apply bright noise - mix - 50

On your top layer apply constellation - make sure to click keep original image
Apply Burnt Edges - use default settings - set your burn color as the same color as your layer

Copy and paste a close-up of your tube - change blend mode to soft light and lower your opacity to 50%

Copy and paste your tube - resize if needed - add a drop shadow - place where desired

Copy and paste the Snow Angel word art - duplicate - drag one copy below your tube layer 

On the bottom copy change the blend mode to burn and lower opacity to 50%

On the top copy change the blend mode to soft light and lower opacity to 60-70%

Merge your tag

Add your artist info and license #

Add your name and hide for the next step

AVATAR:

Duplicate your tag

Crop out the upper left hand corner (set your crop to 1.000x1.000)

Add your initials

Unhide your name on your main tag

Done!!!


15 December, 2011

MESSAGE FROM AIL STAFF!!!

ATTENTION PLEASE!!!! From AIL STAFF!!! 
In light of the issues with the credit card payments, we have decided that right now all payments must be made through Paypal. You can still use a credit card through Paypal. We are sorry for the inconvenience, but hope that for now this will be more beneficial for everyone. Thank you for your patience and Happy Shopping!!!
12 December, 2011

Exclusive Tags for the VERY Awesome Cpt Frogger

At the request of one of the artists from AIL, Charles R Bristow (Cpt Frogger) 
I tubed this gorgeous picture of his fiance Ms Desiree!!!!
These tags are for Charles and Desiree using this tube!!!
Enjoy guys..I loves ya both!!!



Santa Baby


This tutorial was written by Coyotie on 12 Dec., 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice. I'm using the Barb Jensen. Please don NOT use her work unless you have the proper license to do so. This is and exclusive tube that you can purchase and obtain a license for at Scraps N Crap

Scrap kit of choice. I'm using a PTU kit called Santa Baby. You can purchase this kit and many more awesome kits from Angels Designz


This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste your paper and apply mask - merge group

Copy and paste letter - move up slightly - add drop shadow

Copy and paste candycane hanger - resize - drag below letter layer - move around so that the strings aren't showing above the letter - add drop shadow

Copy and paste wordart2 - move over the top of the letter - add drop shadow

Copy and paste garland - move down below the letter - add drop shadow

Copy and paste your tube - resize if needed - place where desired - add drop shadow

Crop your tag

Add your artist info and license #

Add name

Done!!!

11 December, 2011

AIL QUESTION CONTEST TAG WINNER!!!

Heather Bentz (NickelWitch) won the question contest from the AIL FB group!!!! As her prize she got a CoyotieDesigns Exclusive tag!!!!


Congrats Heather!!!!

09 December, 2011

AIL Christmas Carol Tag Contest


03 December, 2011

NEW STORE!!!


Come check out the new home of artists like Charles Bristow, Freya Langford-Sidebottom, Kim Draper, AND MANY MORE!!!!! 
License exchanges are also available for those with a PA license!!!

We'd love to see you there...just click the pic above and HAPPY SHOPPING!!!


22 November, 2011

Star Struck Babez


This tutorial was written by Coyotie on 22 Nov, 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

6 tubes of choice, I'm using the artwork of Keith Garvey. Please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE

Scrap kit of choice. I'm using a PTU kit called Star Struck made by my wonderful friend Kaci of Scrappin Krazy Designs. You can purchase this kit and many more awesome kits from HERE

This tutorial was written with the assumption that you have a basic working knowledge of psp. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste the 6 square frame - using the magic wand click inside one of the squares - expand by 5 - copy and paste one of your tubes - move the tube till the part you want is inside the marching ants - invert - delete - deselect - add drop shadow to the tube part and drag below the frame layer

Repeat the last step for the other 5 frames - add a drop shadow to the frame - hide your white background - merge visible - unhide the white background

Copy and paste ele23 - add drop shadow - drag below your combined frame layer

Copy and paste pink glitter - drag below ele23

Copy and paste silver glitter - drag below pink glitter layer - move down - duplicate - flip

Copy and paste pink glitter garland - send to top - move to the bottom of the frame - add drop shadow

Copy and paste flame - resize - move to bottom left - duplicate - mirror - merge down - add drop shadow - drag below garland layer

Copy and paste your main tube - resize if needed - position where desired - add drop shadow

Crop tag

Add artist info and license #

Add name

Done!!

21 November, 2011

Sinful Darkness


This tutorial was written by Coyotie (with help from her daughter Crystalyn) on 21 Nov, 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice, I'm using the artwork of Keith Garvey. Please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE

Scrap kit of choice. I'm using a PTU kit called Raven by my very wonderful friend Kaci of Scrappin Krazy Designs. You can purchase this kit and many more awesome kits from Kaci HERE


This tutorial was written with the assumption that you have a basic working knowledge of psp. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste paper of choice - apply mask - merge group

Copy and paste bow - move to the top of the mask - add a drop shadow

Copy and paste envelope - move to upper right corner - add drop shadow - drag below the ribbon layer

Copy and paste pin - resize - move to envelope flap - erase 2 parts of the pin so it appears to be piercing the paper - add drop shadow

Copy and paste blackrose - resize - add drop shadow - move to lower right corner of the envelope

Copy and paste purple flower - resize - add drop shadow - move over top of the black rose

Copy and paste white flower - resize - move over top of the knot in the bow - add drop shadow

Copy and paste key - mirror - move to right side - erase part of the ribbon so that it appears to be running through the key - add drop shadow

Copy and paste bird - move somewhere over the pin - add drop shadow

Copy and paste heart - resize - move over top of envelope seal - add drop shadow

Copy and paste feather - resize - move to lower left corner of envelope - add drop shadow

Copy and paste your tube - resize if needed - position where desired - add drop shadow

Crop tag

Add artist info and license #

Add name

Done!!

Wicked Christmas


This tutorial was written by Coyotie on 21 Nov, 2011. Any resemblance to any other tutorial is purely coincidental.

Supplies:

Tube of choice. I'm using the amazing artwork of Freya Langford-Sidebottom, please DO NOT use her work unless you have to proper license to do so. You can purchase her work and obtain a license from AIL

Scrap kit of choice, I'm using a PTU kit called Winter Sweet Fantasy from Dnscraps of Scraps from the Heart. You can purchase this kit and many other awesome kits from her HERE

This tutorial was written with the assumption that you have a basic working knowledge of psp. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste snow - resize - add a subtle drop shadow

Copy and paste leafs5 - resize - add drop shadow

Copy and paste snows - resize - add drop shadow - drag below snow layer

Copy and paste wordartmagic - resize - move to the bottom of the canvas as I've done

Copy and paste leafs2 - resize - add drop shadow - move to over top the word art - drag below word art layer

Copy and paste chains2 - resize - add drop shadow - drag below word art layer

Copy and paste wordart2 - resize - add drop shadow - move to top left of canvas

Copy and paste tube - resize - position where desired -  add drop shadow

Copy and paste silverleafs - resize - add drop shadow - move to left - drag below wordartmagic layer

Copy and paste embellement2 - resize - flip - move to upper right corner

Crop tag

Add artist info and license #

Add name

Done!!

19 November, 2011

SILVER AND GOLD TAG CONTEST!!!!

The new PSP Party E-Mag is having a tag contest!!!!

Come and join us in the Silver and Gold tag contest....the link to all the details is below


and come like our fan page on Facebook....located HERE

All winners will be posted in the Dec. issue of PSP Party E-Mag!!!!
14 November, 2011

All Wet




This tutorial was written by Coyotie on Nov 11, 2011. Any resemblance to any other tutorial is purely coincidental.
Supplies:

Tube of choice. I'm using the artwork of Keith Garvey, please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE

Filters:

Eye Candy 4000 - Gradient Glow
Drip
PhoteEffex - Scanlines

This tutorial was written the assumption that you have a basic working knowledge of psp. I'm using PSP X2, but this can be done in any other version

Let's get started!!!

Open a 600x600 transparent canvas - flood fill white

Pick a color from your tube - set foreground to this color and your background to black

Using your preset shapes tool - rectangle -width set at 5 - draw out a good sized sideways rectangle - convert to a raster layer - using your pick tool - set to perspective - click and hold the lower right corner and move up and left slightly so that your rectangle appears to be angling away from you

Select all - float - defloat - expand by 5 - new raster layer - flood fill white your tube color - apply scanlines - default settings but clicking vertical toggle - add a drop shadow - drag below your rectangle layer

Highlighting back on your original rectangle layer - apply Eye Candy drip - settings of your choice - add a drop shadow - select all - float - defloat - copy and paste a close-up of your tube - move to the left of rectangle - invert - hit your delete key - deselect - change blend mode to screen and lower opacity to 50

Copy and paste your tube - move to the right of your rectangle - add a drop shadow

Add word art of your choice - apply scanlines:
width - 3
spacing - 1
dark band strength - 39
light nonband strength - 64
noise amount - 0
darkness/lightness - 255
verticle toggle - checked
apply a gradient glow - add a drop shadow - apply drip - same settings but click random once

Crop tag

Add artist info and license #

Add name - applying the same scanlines, drip, and gradient glow that were used before

Done




11 November, 2011

Tow the Line Forum Set



This tutorial was written by Coyotie on Nov. 11, 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice (one with a close-up if possible). I'm using the artwork of Keith Garvey, please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE

Filters: Tramages - Tow the Line - default settings
Eye Candy 4000 - Gradient Glow

This tutorial was written with the assumption that you have a basic working knowledge of psp. I'm using PSP X2, but this can be done in any other version

Let's get started!!

Open a 600x250 transparent canvas - flood fill white

New raster layer - flood fill with a dark color from your tube - apply Tramages Tow the line - default settings

New raster layer - flood fill with a light color from your tube - change blend mode to dodge and lower the opacity to 60

Copy and paste your tube - drag below your light color layer - change the blend mode to multiply - duplicate - mirror

Copy and paste the close-up of your tube - apply Eye Candy 4000 - Gradient Glow - glow width at 3 - color settings - fat and color should be the same as the light color from your tube - add a heavy drop shadow

New raster layer - set your foreground to a gradient using the same light color as before - flood fill this layer with your gradient - send to top - select all - contract by 8 - hit the delete key - adjust - add/remove noise - add noise - uniform - 50 - monochrome checked - deselect - add a heavy white drop shadow

Add your artist info and license #

Add your name

Copy

AVATAR:

Open a new transparent canvas - 150x150

Paste as a selection on your 150x150 canvas - move over till the upper left corner is in the canvas box - click - this will come up as a floating selection - defloat - select

Add artist info and license #

Add name or intitials

Done!!!!
07 November, 2011

Flame On


This tutorial was written by Coyotie on Nov. 6, 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice. I'm using the artwork of Keith Garvey. Please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE

Scrap kit of choice. I'm using a PTU kit called Fireball by Kaci of Scrappin Krazy Designs


Filters - Xenoxfex - Constellation: Settings as follows
7.51
49
50
29
51
77
twinkle rotation 45
keep original checked
random seed 1172

This tutorial was written with assumption that you have a basic working knowledge of psp. I'm using PSP X2 but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas - flood fill white

Copy and paste paper of choice - apply mask - merge group - duplicate
on the bottom copy apply gaussian blur: radius 8.00 - apply constellation with the above settings
on the top copy resize by 95%

Copy and paste wire - move up slightly and drag below both mask layers

Set your foreground color to pattern and find the paper you used - set your background color to nil - using your elipse preset shape width set at 5 draw out a medium sized sideways oval - center in canvas and convert to a raster layer

Using your magic wand tool click inside the frame that you just made - expand by 3 - copy and paste a close up of your tube - invert and hit the delete key - drag below your frame layer and add a drop shadow - duplicate and merge down - duplicate and mirror
on the bottom copy apply gaussian blur - radius 6.00 - change opacity to 50
on top layer change blend mode to lighten

Copy and paste your tube - resize - add a drop shadow - duplicate and drag one copy below your frame layer - hide the top copy
on the bottom copy erase the bottom part of your tube to the frame
unhide the top copy and on this copy erase the same bottom portion of your tube so it appears to be coming out of the frame

Copy and paste flame - resize -drag between your top tube layer and your frame layer - move down slightly - erase and parts that appear on your tube - add a drop shadow

Copy and paste flame boot - resize - move to the right - add a drop shadow

Crop tag

Add artist info and license #

Add name

Done!!

Wicked Ways


This tutorial was written by Coyotie on Nov. 5, 2011. Any resemblance to any other tutorial is purely coincidental.

Supplies:

Tube of choice. I'm using the artwork of Gary Rudisill, please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PSP Asylum

Scrap kit of choice. I'm using a PTU kit called Mysti Night by Dnscraps of Scraps from the Heart


This tutorial was written with assumption that you have a basic working knowledge of psp. I'm using PSP X2 but this can be done with any other version

Let's get started!!

Open a 600x600 canvas flood fill white

Copy and paste paper of choice apply mask

Copy and paste moon - resize and move up slightly

Copy and paste wicked2 box - resize - move to bottom - add drop shadow

Copy and paste word art - resize - place over wicked2 box - add drop shadow

Copy and paste curtains - resize - move to left of wicked2 box - add drop shadow - duplicate and mirror

Copy and paste your tube - resize if needed - add drop shadow - move to top of wicked2 box

Crop tag

Add artist info and license #

Add name

Done!!
01 November, 2011

Vampire Hell



This tutorial was written by Coyotie on Nov. 1, 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tube of choice. I'm using the artwork of Barbara Jensen, please DO NOT use her work unless you have the proper license to do so. You can purchase her work and obtain a license directly from Barb HERE

Scrap kit of choice. I'm using a PTU kit called Vampire Hell from Dnscraps, you can purchase this kit at Scraps From The Heart

Plug-ins:
EyeCandy 4000 - Gradient Glow

This tutorial was written with assumption that you have a basic working knowledge of psp. I'm using PSPX but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas, flood fill white

Copy and paste tag2 resize by 65% add a drop shadow

Copy and paste your tube, resize if needed and place towards the bottom of the tag add a drop shadow

Copy and paste rose resize by 80% free rotate left by 90 degrees place to the right of your tube add a drop shadow, drag below your tube layer duplicate and mirror

Copy and paste bow resize to the top right corner of the tag drag below both rose layers add a drop shadow duplicate and mirror

Copy and paste word art 2 resize move to top and drag below your tube layer
add a gradient glow and a drop shadow

Copy and paste word art 5 repeat the above step but move the word art to the bottom

Copy and paste the coffin resize move to the left and up slightly drag below tube and word art layers add a drop shadow and move to the bottom layer

Copy and paste spider resize move to the left drag to just above the coffin layer and place so it appears to be on the coffin add a drop shadow

Crop your tag

Add artist info and license #

Add name

Done!!

Bloodlines


This tutorial was written by Coyotie on Nov. 1, 2011. Any resemblance to any other tutorial is purely coincidental

Supplies:

Tubes of choice (one with a close up if possible). I'm using the artwork of Keith Garvey, please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE

Scrap kit of choice. I'm using a PTU kit called Sacrifice made by Dnscraps, you can purchase this kit at Scraps From The Heart


This tutorial was written with the assumption that you have a basic working knowledge of psp. I'm using PSPX but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas and flood fill white, apply mask resize by 75% and merge group

Copy and paste metal frame, resize by 65%, using your magic wand tool click inside the frame expand by 10, copy and paste your tube closeup invert and hit the delete key, drag the tube layer below the frame layer and add a drop shadow to both the tube and frame layers, drop tube opacity to 65

Copy and paste double hearts drag below mask layer move up slightly and add a drop shadow

Copy and paste word art 5 resize buy 65%, move to bottom of frame and add a drop shadow

Copy and paste cross2 resize by 65% change blend mode to overlay and drop opacity to 85 and drag below word art layer

Copy and paste both tubes resize if needed place where desired add a drop shadow to both

Crop your tag

Add artist info and license #

Add name

Done!!
17 October, 2011

Love of Blood


This tutorial was written by Coyotie on 17 Oct, 2011. Any resemblance to any other tutorial is purely coincidental.

Supplies:

Tube of choice. I'm using the artwork of Keith Garvey, please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE

Scrap kit of choice. I'm using a PTU kit called Sacrifice made by Dnscrapes of Scraps From the Heart

Mask - Vix_Mask94

This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSPX but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas, flood fill white

Copy and paste paper of choice, apply mask

Copy and paste double hearts, add a drop shadow and move down slightly and center

Copy and paste blood, move down and add a drop shadow

Copy and paste metal ribbon, resize add drop shadow

Using your magic wand tool click inside the metal ribbon, modify and expand by 6...Copy and paste a close up of your tube...invert and hit the delete key...drag below your ribbon layer and add a drop shadow

Copy and paste charm2 resize move to the left add a drop shadow

Copy and paste bow charm resize and move to the top middle add drop shadow

Copy and paste garter resize move towards the bottom add a drop shadow

Copy and paste your tube resize add a drop shadow and drag below the garter layer

Copy and paste the cup resize add drop shadow and move the lower right of the garter

Crop tag

Add artist info and license #

Add name

Done!!!

09 October, 2011

I'll Put a Spell on You


This tutorial was written by Coyotie on Oct. 9, 2011. Any resemblance to any other tutorial is purely coincidental.

Supplies:

Tube of choice: I'm using the artwork of Keith Garvey. Please DO NOT use his work unless you have the proper license to do so. You can purchase his work and obtain a license from PTE

Scrap kit of choice: I'm using a PTU kit called Mysti Night by Dnscraps from Scraps from the Heart


This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSPX, but this can be done in any other version.

Let's get started!!

Open a 600x600 transparent canvas and flood fill white

Copy and paste your paper and apply mask

Copy and paste moon resize by 50% 2x move to left

Copy and paste sparkles resize by 85% 2x and center

Copy and paste tree2 resize by 50% 2x place to right of mask wording add a drop shadow

Copy and paste crypt2 resize by 50% 2x place to the left of tree2 add drop shadow and drag below tree2 layer

Copy and paste tree resize by 50% move to left of mask wording add drop shadow

Copy and paste tombstones resize by 50% 2x move to the right of the tree add a drop shadow and drag below tree layer

Copy and paste the gargoyles and gate resize by 75% center and move down slightly add a drop shadow

Copy and paste support2 resize by 50% 3x move to lower left of the gate add drop shadow

Copy and paste light4 resize by 50% 4x add drop shadow and place on top of support2

Copy and paste skulls resize by 50% 3x move down to the left of the support add drop shadow

Copy and paste wand3 resize by 50% 2-3x move to the left by the skulls drag below skulls layer and add drop shadow

Copy and paste hat resize by 50% 2x place over the left side gargoyle add drop shadow

Copy and paste broom resize by 50% 2x place the left near the wand add drop shadow

Copy and paste tube resize as needed and place where desired add drop shadow

Crop tag

Add artist info and license #

Add name

Done!!



18 September, 2011

Moonlit Goddess


This tutorial was written by Coyotie on Sept. 18, 2011

Supplies:

Tube of choice. I'm using the artwork of Keith Garvey, please do not use his work unless you have the proper license to do so. You can purchase his work and obtain a license at PTE located HERE

Scrap kit of choice. I'm using a PTU kit called Goddess2 by Kaci of Scrappin Krazy Designs. You can purchase this and many more awesome kits from Kaci HERE


This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSPX but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas and flood fill white

Copy and paste paper of choice and apply mask, merge group

Copy and paste a close up of your tube, if possible, and change the blend mode to overlay and erase any excess if necessary

Copy and paste your clouds and moon and move them to the upper right of the mask and add a light drop shadow to the moon only

Copy and paste the swirl and give it the same drop shadow as the moon

Copy and paste your tube giving it the same drop shadow

Crop your tag

Add artist info and license #

Add your name

Done!!
10 August, 2011

UPDATE

Hey everyone, I know I haven't been posting near as many tuts as I used to. Things in my real life have been super crazy, I had my 3 youngest here visiting for the summer and I got married!! So now I've got to play catch up...so please bear with me as I start trying to get back into the swing of things and there is soooooo much to look forward too as well...I'm gonna have a ton of new tuts coming your way INCLUDING forum sets!!! So I really hope that all my awesome followers are as excited as I am about all that's coming...so stay tuned for tons of new stuff!!!!

Carnivale



This tutorial was written by Coyotie on Aug 10, 2011. Any resemblance to any other tutorial is purely coincidental.


Supplies:


Tube of choice. I'm using the very gorgeous artwork of Barb Jensen, please do not use her work unless you have the proper license to do so. You can purchase her work and obtain a license from Barb's website located HERE


Scrap kit of choice. I'm using a PTU kit called "Smokin'" done by my very wonderful friend Shani of Wicked Princess Scraps. You can purchase this kit and many more awesome kits from her HERE


Mask:




This tutorial was written with assumption that you have a basic working knowledge of PSP. I'm using PSP X but this can be done in any other version.


Let's get started!!


Open a 600x600 transparent canvas and flood fill white


Copy and paste your paper and apply mask, resize if desired and merge group


Copy and paste your frame, resize by 75% and add a very light drop shadow


Copy and paste curtain, resize and add a drop shadow, then move to the upper left part of the frame


Copy and paste the piano keys, resize add a drop shadow and drag beneath the frame


Copy and paste your tube, resize add drop shadow and move to the right of the frame so she appears to be coming out of the frame


Copy and paste the ticket, resize add drop shadow and drag below the tube and curtain layers then move it towards the bottom of the frame


Copy and paste the rose cluster, resize add drop shadow and place in the upper corner of the curtain


Copy and paste the fan, resize add drop shadow, rotate slightly and move to the upper right corner of the frame and drag beneath the tube layer


Crop your tag


Add artist info and license #


Add your name


Done!!
01 July, 2011

Fuck it All


This tutorial was written by Coyotie on July 1, 2011. Any resemblance to any other tutorial is purely coincidental.

Supplies:

Tube of choice. I'm using the artwork of Jose Cano, please do not use his work unless you have the proper license to do so. You can purchase his work and obtain a license from PTE located HERE

Scrapkit of choice. I'm using a PTU kit called "Fuck It" from my very awesome friend Kerry of Purple's Designs. You can find this and many more awesome kits from her HERE

This tutorial was written with assumption that you have a basic working knowledge of PSP. I'm using PSP X, but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas and flood fill white

Copy and paste glitter1

Copy and paste butterfly add drop shadow

Copy and paste belt buckle add drop shadow and move towards the top of the butterfly

Copy and paste row of curses add drop shadow and move below butterfly

Copy and paste your tube resize as needed add a drop shadow and move where desired

Crop tag

Add artist info and license #

Add your name

Done!!

Angel Dreams


This tutorial was written by Coyotie on July 1, 2011. Any resemblance to any other tutorial is purely coincidental.

Supplies:

Tube of choice. I'm using the artwork of Keith Garvey, please do not use his work unless you have the proper license to do so. You can purchase his work and obtain a license from PTE located HERE

Scrapkit of choice. I'm using a PTU kit called "Lost in a Fantasy" made by my very awesome friend Tonya of Broken Sky Dezine. You can find this kit and many more awesome kits from her HERE

Mask:

Filters:

Xenofex - Constellation

This tutorial was written with the assumption that you have a basic working knowledge of PSP. I'm using PSP X but this can be done in any other version

Let's get started!!

Open a 600x600 transparent canvas and flood fill white

Copy and paste a paper of choice, apply mask, resize if desired and merge group
Apply Xenofex - Constellation...settings of your choice

Copy and paste bridge add a drop shadow

Copy and paste curtains resize slightly and move to the upper left, duplicate and mirror, merge down and apply a light drop shadow

Copy and paste fan resize and move to the top of the curtains add a drop shadow

Copy and paste your tube, resize place where desired and add drop shadow

Copy and paste candle1 resize move to bottom right on the bridge add drop shadow, duplicate and mirror

Copy and paste bird resize and move to the left add drop shadow

Hide your white background layer, merge all visible and resize by 80%

Crop your tag

Add artist info and license #

Add your name

Done!!

About Me

My Photo
Kellie G.
I'm Kellie and I'm just a simple girl who loves to read and travel. Mom of 5 and Independent Distributor for It Works! Global.
View my complete profile

I CT For

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

My Blinkie

cdt blinkie1
Photobucket

Sites I Prowl

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

My Licenses

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

The Den Clock

My CU Licenses

Photobucket
Photobucket